SITE INFORMATION

Terms of service.

General information about our products, services and the use of this website .

Policies, Limited Warranty and Terms of Sale and Website Use

Ristic Remanufacturing Corporation, an Alberta corporation, operating as Carburetor Doctor.

In these terms, “Carburetor Doctor,” “we,” “us” and “our” mean Ristic Remanufacturing Corporation. “You” means the purchaser or website user, as applicable. These terms apply to products and restoration services supplied through carburetor.ca and orders placed directly with us.

Your statutory rights. These terms supplement your rights under applicable law. No provision excludes, restricts or waives a consumer right, condition, warranty, remedy or liability that cannot lawfully be excluded, restricted or waived. Where mandatory law conflicts with these terms, that law prevails. The limited warranty below is additional to any non-excludable legal warranty and does not determine the duration of those legal rights.

1. Orders, prices and payment

Prices are in Canadian dollars unless expressly stated otherwise. Applicable taxes, shipping charges and any core charge will be identified before you commit to an order. Any mandatory fixed fee will be included in the advertised price as required by law. For cross-border orders, we will disclose any known import charges and explain any duties, brokerage or other third-party charges that cannot reasonably be calculated in advance.

Available payment methods are those displayed at checkout or stated in your written quotation. An automated order acknowledgement confirms receipt of your request. Acceptance occurs when we expressly confirm acceptance or dispatch the goods. If we cannot fulfil an order, we will notify you and refund any payment for the unfulfilled portion.

We may correct a listing error before accepting an order. A correction affecting an accepted order requires your agreement or another remedy permitted by law.

We provide an opportunity to review and correct online order details before purchase and provide a retainable copy of the agreement within the period required by law. The terms supplied with your order govern that transaction. Later website changes do not retroactively amend an existing order.

2. Remanufactured and restored products

Unless a listing expressly says otherwise, our rebuilt, restored and remanufactured carburetors contain previously used components. They are not represented as entirely new products.

A remanufactured unit may combine serviceable original components with new or replacement components. Castings and other reusable parts may show age, casting marks, previous repairs, staining, pitting or cosmetic variations consistent with their disclosed condition. Surface appearance, plating colour, markings and component details may vary between units.

The listing or written quotation identifies the restoration work and condition being offered. We do not promise that every component has been replaced, that a unit is concours-correct, or that it retains every original production detail unless we expressly agree to that specification in writing.

Photographs are illustrative unless identified as photographs of the actual unit offered. Material differences from the description will be disclosed. These statements do not excuse undisclosed defects or failure to meet an agreed description or applicable legal standard.

3. Identification, fitment and application

Provide the complete carburetor identification number and accurate vehicle, engine, transmission, fuel-system and modification information before ordering. Year, make, model, photographs and measurements alone may be insufficient because vehicles and carburetors are often modified or exchanged during their service lives.

Unless we expressly confirm a particular application in writing, application references are guidance and do not constitute a guarantee of fitment or suitability for your particular vehicle or engine. You and your installer must verify mounting, linkage, choke operation, fuel connections, clearance, fuel pressure and other installation requirements before use.

If we supply a product that differs from the identification or specification we accepted, contact us so we can correct the error. If incorrect or incomplete information supplied by you causes an incorrect selection, the ordinary voluntary return policy applies, subject to your statutory rights.

Nothing in this section overrides an express fitment commitment we make, an agreed product description or a non-excludable legal obligation.

4. Performance and operating conditions

A carburetor is one component of a complete engine and fuel system. Results depend on engine condition, ignition, compression, valve timing, vacuum integrity, exhaust, fuel delivery, operating temperature, altitude, installation and adjustment.

Except for an express written specification or obligation imposed by law, we do not guarantee a particular horsepower, torque, fuel economy, emissions result, starting characteristic, idle quality or performance improvement. We do not guarantee that replacing or rebuilding a carburetor will resolve a symptom originating elsewhere in the vehicle.

Bench settings are initial settings. Final installation checks and adjustments may be required for the particular engine and operating conditions. Routine adjustment and diagnosis of other vehicle systems are not included in the purchase price unless agreed in writing.

5. Installation and fuel-system cleanliness

Installation and diagnosis should be performed by a person qualified to work safely on gasoline fuel systems, using the applicable vehicle and carburetor instructions.

Before installation, the installer must inspect the fuel tank, lines, pump, hoses and filters, and clean or replace contaminated or deteriorated components as needed. Use suitable filtration, the specified fuel pressure and fuel-compatible connections. Prevent dirt, rust, hose fragments, sealing materials and other debris from entering the carburetor during installation.

Contamination and unsuitable or deteriorated fuel are common causes of carburetor malfunction. Even a small particle can prevent the inlet valve from sealing, causing flooding or leakage. Debris can also block jets and passages or interfere with moving parts. A clean replacement carburetor can be contaminated immediately by an uncorrected problem elsewhere in the fuel system.

Subject to your statutory rights, we are not responsible for contamination introduced after delivery or for damage or malfunction caused by the vehicle’s fuel supply, installation environment or other external source. Rebuilding or replacing a carburetor does not clean the vehicle’s fuel system.

Do not operate a vehicle with a fuel leak, uncontrolled flooding or another unsafe fuel-system condition. Shut down the engine and have the cause corrected before further operation. Follow appropriate fire precautions and the applicable installation instructions.

6. Fuel, additives and storage

Use fresh fuel of the type, ethanol content and specification approved for the particular carburetor and application. Compatibility with ethanol blends varies with the unit and components. Contact us before use if the permitted blend is uncertain.

Unless expressly approved by us in writing for the product, do not use high-ethanol blends, E85, methanol, alternative fuels, aggressive cleaners or fuel additives. Solvents and other chemicals may damage seals, diaphragms, inlet-valve tips, accelerator-pump components and protective finishes.

Our limited warranty excludes damage or malfunction caused by unsuitable, contaminated, stale or water-contaminated fuel, excessive ethanol content, phase separation, gum, varnish, corrosion, unapproved additives or cleaners, or improper storage. Normal evaporation, heat soak and fuel deterioration during storage are not manufacturing defects. Follow the storage instructions appropriate to the product and fuel.

An excluded fuel or chemical condition affects warranty coverage for damage or malfunction it causes or contributes to. Its mere presence does not automatically cancel coverage for an unrelated defect.

7. Permitted uses

Products are supplied only for the application described in the listing or accepted quotation.

Our products must not be used in aircraft or aviation applications.

Marine use is permitted only for a unit expressly identified and supplied for that marine application. Automotive units must not be substituted for marine fuel-system components. Racing, competition and other specialised applications require our express written acceptance and any separately agreed warranty terms.

You and your installer are responsible for checking the installation’s applicable safety and emissions requirements. We do not represent that a product is approved for every jurisdiction or use. Nothing authorises removal or defeat of required emissions equipment.

8. Limited 90-day warranty

Subject to the exclusions below, we warrant our mechanical products and our restoration workmanship against defects in materials and workmanship for 90 days from the original purchase date. The original purchaser must retain proof of purchase and notify us of the issue within that period.

For a defect covered by this voluntary warranty, we will inspect the product and, at our option, repair it, replace it with an equivalent product, or refund the amount paid for the defective product or affected restoration service. Mandatory legal remedies remain available where applicable.

A warranty repair or replacement does not restart this voluntary 90-day period, except where required by law or agreed in writing.

Exclusions

This voluntary warranty does not cover a defect, damage or malfunction caused or contributed to by any of the following conditions.

  • Dirt, rust, sediment, water, corrosion, foreign material, hose deterioration, sealant fragments, gum or varnish introduced after delivery.
  • Unsuitable or deteriorated fuel, excessive ethanol content, unapproved additives, solvents or cleaners.
  • Incorrect identification, incompatible application, improper installation, adjustment, fuel pressure, float setting, linkage or choke operation.
  • Inadequate filtration, vacuum leaks, ignition faults, overheating, backfire, engine defects or faults elsewhere in the vehicle.
  • Misuse, abuse, accident, neglect, improper maintenance, improper storage or continued operation after an unsafe condition becomes apparent.
  • Alteration, disassembly, modification or third-party repair that causes the problem or materially prevents reliable assessment of its cause.
  • Use outside the application supplied, including prohibited aviation use or an unapproved marine or competition application.
  • Ordinary wear, routine servicing or cosmetic characteristics consistent with the disclosed remanufactured condition.

We will assess the reported failure and explain the grounds for any denial. A report of flooding, poor running or leakage alone does not establish a defect in our materials or workmanship.

9. Warranty claims and technical support

Contact us with your order number, carburetor identification, installation date, symptoms and relevant photographs or diagnostic information. Preserve the product and, where reasonably possible, evidence of the suspected contamination or fuel-system condition.

Please obtain return instructions before sending a product for inspection. Drain and prepare it for transport in accordance with the carrier’s applicable requirements. Do not send fuel with the product.

Where reasonably possible, give us an opportunity to inspect before authorising third-party work. We do not undertake to pay third-party diagnosis, cleaning, adjustments or repair bills unless approved in writing in advance or required by law.

We will explain the shipping arrangements when authorising a warranty return. For a confirmed covered defect or our supply error, we will pay reasonable standard return and replacement shipping costs. Any inspection or cleaning charge for an excluded condition must be disclosed and approved before that work is performed.

Technical support is available by email for products we supply. Remote advice is based on the information provided and does not replace an on-site assessment. We cannot diagnose every engine or vehicle fault remotely.

10. Voluntary returns and cancellations

The following voluntary return policy is additional to any mandatory right to cancel, reject goods or obtain a remedy.

Unused, uninstalled standard-stock products may be returned within 60 days of purchase with proof of purchase. Contact us first for instructions. Products must be complete, undamaged and in their supplied condition. Packaging may be opened for reasonable inspection.

A 20% restocking fee applies to eligible change-of-mind returns. Original shipping charges and reasonable, previously disclosed outbound shipping included in a free-shipping offer may be deducted. Return shipping is the purchaser’s responsibility for these voluntary returns.

Installed, fuel-exposed, altered, custom-built or customer-specific products are outside this voluntary change-of-mind policy unless we agree otherwise. Cancellation terms for custom work, including any deposit and reasonable work already authorised, must be disclosed and agreed before work starts.

Restocking fees and change-of-mind restrictions do not apply to remedies for our error, a covered defect or a statutory cancellation where the law prohibits those charges. Canadian and international customers retain any mandatory rights applicable to their transactions.

11. Customer-owned units and exchange cores

For restoration of your own unit, the agreed scope and price are subject to the inspection conditions stated in your quotation. We will obtain your approval before undertaking additional chargeable work. Hidden damage, corrosion, missing parts and previous modifications may affect whether restoration is feasible.

Any inspection fee, cancellation charge, storage arrangement or treatment of a unit that cannot be restored must be agreed separately. Sending us a unit does not authorise its disposal.

For exchange sales, the amount of any core charge, eligibility criteria, return deadline, shipping responsibility and refund conditions will be stated before purchase. Core eligibility may depend on correct identification, completeness and rebuildable condition under those disclosed criteria.

Ownership of an accepted exchange core transfers to us when we accept it for core credit. Customer-owned units sent for restoration remain customer property unless another arrangement is expressly agreed.

12. Shipping, loss and damage

Dispatch and delivery estimates are estimates unless expressly guaranteed. We will provide the delivery information and notices required by applicable law. Statutory cancellation or refund rights for non-delivery or delay remain available.

Contact us promptly about missing, incorrect or damaged shipments. Retain the packaging and take photographs where possible. We will coordinate with the carrier or insurer and explain any necessary claim steps. Contacting a carrier or exercising a legal right does not by itself forfeit your right to a remedy.

For consumer purchases, our delivery responsibilities and allocation of transit risk remain subject to applicable law. Different commercial delivery terms apply only if expressly agreed.

13. Exclusion of additional warranties

To the maximum extent permitted by applicable law, the express warranty above and any other express written commitment are the only voluntary warranties we provide. To that extent, we exclude other implied conditions and warranties, including merchantable quality, fitness for a particular purpose and durability.

This exclusion does not override the product description, an express representation or commitment, or any condition, warranty or remedy that cannot lawfully be excluded. A third-party manufacturer’s warranty, if any, is additional and does not replace our own non-excludable obligations.

14. Limitation of liability

The following limitations apply only to the extent permitted by applicable law and form an important part of these terms.

To that extent, Ristic Remanufacturing Corporation and its officers, directors, employees and agents will not be liable for indirect, incidental, consequential, special, exemplary or punitive loss arising from a product, restoration service or website use, whether claimed in contract, tort, negligence or otherwise.

Excluded losses include loss of use, profit, revenue, business opportunity or anticipated savings, vehicle downtime, rental or substitute transport, towing, third-party diagnosis, removal and reinstallation labour, and damage to other property or equipment, to the extent those losses may lawfully be excluded.

To the extent permitted by law, our aggregate liability arising from the affected product or service is limited to the amount you paid us for that product or service. This limitation expressly extends to claims alleging ordinary negligence where the law permits that limitation.

Nothing excludes liability for fraud, fraudulent misrepresentation, wilful misconduct, gross negligence, death or personal injury caused by negligence, or any other liability that cannot lawfully be limited. Nothing prevents recovery of a refund, shipping expense or other remedy that mandatory consumer law requires.

15. Website content and intellectual property

You may view, download and print website material for your own product evaluation, installation reference and lawful personal use. Ownership of that material remains with us or its respective owner. Other reproduction or commercial republication requires permission unless permitted by law.

Manufacturer names, trademarks and part numbers identify products or compatibility. They do not imply an affiliation or endorsement unless expressly stated.

We take reasonable care with website content, but technical, pricing or photographic errors may occur. Contact us to resolve an inconsistency before ordering. This provision does not excuse misleading advertising or remove rights arising from an accepted order.

Third-party links are provided for convenience. Their operators control their content and practices. Personal information is handled as described in our separate Privacy Policy.

16. Governing law and disputes

These terms are governed by Alberta law and applicable federal Canadian law, subject to mandatory consumer protections and jurisdictional rules that apply to you.

Where legally permitted, disputes may be brought in the courts of Alberta. This clause does not deprive a consumer of a mandatory right to bring proceedings in another jurisdiction, make a regulatory complaint or use another remedy available under applicable law.

If a provision is unenforceable, it will be limited or severed to the extent permitted by law, and the remaining provisions continue to apply. No waiver of a breach is a waiver of a later breach.

17. Contact

Ristic Remanufacturing Corporation
Operating as Carburetor Doctor
Alberta, Canada

Business and return address — 5014-56 St, Stettler, AB T4K 1B4
Customer service email — doc@carburetor.ca
Telephone — 800-460-2162
Effective date — November 17, 2026